Línea de producción de cartón corrugado

Parámetros técnicos principales y los requisitos en la línea de producción
Tipo：Wj120-1600-i tipo de tres capas de cartón corrugado línea de producción:
1.MAX. Production width：1600mm
2.Design speed：120m/min
3.Economic speed： 100-110m/min
Note: The line speed test paper shall meet the following requirements :( device surface temperature not lower than 172 ℃ above)
﹡base Paper grade not lower than B grade ﹡Paper moisture content of about：11%±2%
﹡top paper：100—250g/m2 ﹡core paper：100--250g/m2
﹡Corrugated paper：100—200g/m2
1.Flute type combination：A 、C、 B、 E（Or managed by the customer）
2.Steam necessary requirements：
3.﹡Amount of steam2500—3000Kg/Hr 4. ﹡Maximum pressure：1.2Mpa
5.﹡Common pressure：0.8-1.1Mpa
6、Power supply：380V 50Hz Three-phase four-wire system
7、The total installed power equipment：about 200KW Actual consumption: about 150KW (full speed)
8、Equipment area: about 52m 10m 5m (specific length foundation figure date)
9、Equipment Ejection direction: According to user plant to determine the drive left-or right position
10、Equipment suitability, available A, B, C class domestic or imported raw paper base paper