Termociclador PCR con gradiente

En perfectas condiciones, como se puede apreciar en fotos. Se puede hacer factura cobrándose IVA a parte del precio marcado.

Temperature:
Gradient range 20°C to 80°C
Maximum gradient 15°C
Minimum gradient 1°C
Temperature range 4°C to 99°C
Temperature set point precision 0.1°C
Block uniformity (over full range) ± 0.2°C
Temperature accuracy ± 0.2°C
Pre-run sample cooling Yes
End of program cooling below ambient Yes

Heating/Cooling Rate:
Heating rate, between 55°C and 90°C on a 50°C to 95°C step:
0.2 ml micro tubes 3.3°C/sec
0.5 ml micro tubes 3.3°C/sec
Cooling rate, between 90°C and 55°C on a 95°C to 50°C step:
0.2 ml micro tubes 2.0°C/sec
0.5 ml micro tubes 2.0°C/sec

Heated Lid:
Adjustable heated lid Yes
Heated lid enable/disable Yes
Selectable heated lid temperature 100°C to 115°C
Over-temperature cut-out Fixed at 145°C
Temperature sensor Thermistor
Heater type Etched foil
Heater power 33W
Warm up time 4 min approximately (ambient to 105°C)
The heated lid will only come on
if the set temperature is above 35°C


Programming:
Program naming using alpha keys YES
Program password protection YES
Number of programs (3 step) 80
Maximum number of steps per stage 35
Maximum number of steps per stage 25
Minimum hold time 1 sec
Maximum hold time 18 hrs
Incremental/decremental temperature YES
Incremental/decremental step hold time YES
Programmable ramp rate (heat or cool) Variable in 0,1ºC/sec steps